Menu

Steam Sterilizer (Ampoule/Vial)

Introduction Ampoule Steam Sterilizer is mainly used for the sterilization, leak test and washing of ampoule, syrup and IV solution with small capacity. It adopts pressure steam as sterilizing medium to achieve the uniform sterilization between 105℃～127℃. This sterilizer adopts heating mode of displacement and exhausting from multi-points to ensure the through elimination of cold air in chamber, uniform and rapid heating and eliminate the dead corner caused by the existing cold air. Leak test by vacuum and color water is adopted to improve the detection rate of waste after sterilization, meanwhile provides the documents system that meets 2010 version GMP requirement. Technical data
Equipment Model Door Trolley Chamber Dimension Overall Weight Clean Deionized Clean C A Control Driver Color
Volume Dimension (Unloading) Steam Water Water Power Power Water
(Option)
mm mm Kg Kg/cycel L/cycel L/cycel Nm3/h 220V/Kw 380V/Kw L/cycel
XG1.SDE-0.6 2 1 1200*610*910/0.67m3 1490*1390*1940 1500 28 260 230 5.8 0.5 2 500
XG1.SDH-0.8 2 1 1450*610*910/0.80m3 1742*1390*1940 1600 34 310 280 7.7 0.5 2.9 650
XG1.SDA-1.0 2 2 1700*610*910/0.94m3 1992*1390*1940 1800 48 350 280 9.6 0.5 2.9 850
XG1.SDB-1.2 2 1 1500*680*1180/1.20m3 1812*1465*1940 2300 58 400 280 12 0.5 2.9 1000
XG1.SDC-1.5 2 2 1870*680*1180/1.50m3 2182*1465*1940 2550 74 650 400 14.4 0.5 4.6 1250
XG1.SDD-2.0 2 2 1700*1000*1200/2.04m3 2062*1792*1990 2650 107 700 400 19.2 0.5 4.6 1700
XG1.SDG-2.5 2 2 2100*1000*1200/2.52m3 2462*1792*1990 2900 138 750 400 24 0.5 4.6 2100
XG1.SDN-3.0 2 3 2500*1000*1200/3.00m3 2862*1792*1990 3250 159 800 400 28.8 0.5 6.05 2500
XG1.SDO-3.5 2 3 2900*1000*1200/3.48m3 3262*1792*1990 3450 175 1060 400 33.6 0.5 6.05 3000
XG1.SDF-5.0 2 4 4200*1000*1200/5.04m3 4562*1792*1990 4300 277 1850 350 48 0.5 6.2 4300
XG1.SDQ-6.0 2 5 5200*1000*1200/6.24m3 5562*1792*1990 4500 347 2000 350 57.6 0.5 6.2 5500

Steam Sterilizer (D series)

Introduction PT-D Series Steam Sterilizer is a top grade sterilizing device in full accordance with GMP regulations of the newest version. It is widely used for sterilization of biological products, vessels, sterile gown, medical instruments and dressing, which require high sterilization effect in areas of biology engineering, medical hygiene, animal laboratory and pharmaceutical industry, meanwhile provides the documents system that meets 2010 version GMP requirements. Technical data
Equipment Model Door Chamber Dimension/Overall Dimension Weight (Unloading) Plant Steam Pure Steam Clean Water C A Driver Power
mm Kg Kg/cycel L/cycel L/cycel L/min 380V/Kw
XG1.DWS-0.24D XG1.DTS-0.24D 1 670*600*600/0.24m3/ 932*1235*1780 600 15 5 250 36 1.45
XG1.DWS-0.24 XG1.DTS-0.24 2 670*600*600/0.24m3/ 982*1235*1780 650 15 5 250 36 1.45
XG1.DWX-0.36D XG1.DTX-0.36D 1 994*600*600/0.36m3/ 1256*1235*1780 670 18 7 250 36 1.45
XG1.DWX-0.36 XG1.DTX-0.36 2 994*600*600/0.36m3/ 1306*1235*1780 720 18 7 250 36 1.45
XG1.DWE-0.6D XG1.DTE-0.6D 1 1170*610*910/0.65m3/ 1412*1306*1940 1400 20 10 300 36 2.35
XG1.DWE-0.6 XG1.DTE-0.6 2 1170*610*910/0.65m3/ 1462*1306*1940 1450 20 10 300 36 2.35
XG1.DWH-0.8D XG1.DTH-0.8D 1 1450*610*910/0.80m3/ 1692*1306*1940 1600 22 12 300 36 2.35
XG1.DWH-0.8 XG1.DTH-0.8 2 1450*610*910/0.80m3/ 1742*1306*1940 1650 22 12 300 36 2.35
XG1.DWA-1.0D XG1.DTA-1.0D 1 1700*610*910/0.94m3/ 1942*1306*1940 1750 25 15 400 36 2.35
XG1.DWA-1.0 XG1.DTA-1.0 2 1700*610*910/0.94m3/ 1992*1306*1940 1800 25 15 400 36 2.35
XG1.DWB-1.2D XG1.DTB-1.2D 1 1500*680*1180/1.20m3/ 1762*1465*1940 1950 25 15 400 36 3.85
XG1.DWB-1.2 XG1.DTB-1.2 2 1500*680*1180/1.20m3/ 1812*1465*1940 2000 25 15 400 36 3.85
XG1.DWF-1.5D XG1.DTF-1.5D 1 1870*680*1180/1.50m3/ 2132*1465*1940 2150 28 18 500 36 3.85
XG1.DWF-1.5 XG1.DTF-1.5 2 1870*680*1180/1.50m3/ 2182*1465*1940 2200 28 18 500 36 3.85
XG1.DWM-2.0 XG1.DTM-2.0 2 1700*1000*1200/2.04m3/ 2062*1792*1990 2650 40 30 600 36 3.85
XG1.DWG-2.5 XG1.DTG-2.5 2 2100*1000*1200/2.52m3 2800 45 35 650 36 4
XG1.DWT-3.0 XG1.DTT-3.0 2 2500*1000*1200/3.00m3 3100 55 45 650 36 4
XG1.DWO-3.5 XG1.DTO-3.5 2 2900*1000*1200/3.48m3 3350 60 50 750 36 4
XG1.DWL-4.0 XG1.DTL-4.0 2 3400*1000*1200/4.08m3 3700 65 55 750 36 4
XG1.DWK-5.0 XG1.DTK-5.0 2 4000*1000*1200/4.80m3 4100 80 70 850 36 5.5
 

Superheated Water Sterilizer

Introduction PT-PSM Series sterilizer is used for the sterilization of glass bottles, plastic bottles, and bags in pharmaceutical enterprises and medical institutions, as well as canned drinks and foods in food enterprises. It employs superheated water for sterilization and impresses with uniform sterilization. Technical data 3124234

Syrup/large Volume Filling Machine

Description: This high-dose liquid filling and capping machine is the main equipment of antibiotic vial of water injection, oil seepage and high-dose infusion bottle filling, the main working principle is the use of peristaltic pumps to control the raw liquid material filling required filling volume to antibiotics vial, and screw the cap. Characteristic: Ceramic pump, peristaltic pump or high precision peristaltic pump, with high rotary precision is high running speed and filling precision. Filling, stoppering and capping monoblock machine. Space saving and simple structure. Good appearance and easy to clean. Cylinder positioning with high precision, running is stable can fill different size of bottles. Easy operation, speed controlled by inverter, high automation degree. No bottle, no filling; no stopper, machine auto stops; alarm when insufficient stoppers. With auto counting function CE certified, standard electric installation, safety guarantee on operation. Optional acrylic glass protection hood and 100-class laminar flow Optional pre-filling and after-filling nitrogen filling. The whole machine is designed according to GMP requirements.   Technical Data
Suitable bottle range 30/50/150/200ml
Filling error ±2％
Auto stoppering ratio ≥99%
Power supply 380V 50Hz
Power 1.5 KW
Productivity 30ml 50-60vials/min
Compress air pressure 0.3~0.5Mpa    30m3/h
Filling head 4pcs
Single machine noise ≤70dB
Weight (approx) 1200Kg
Dimension 3500×900×1750mm

Tube Filling and Sealing Machine

Introduction PT-80A-C high speed tube filling and sealing machine is for all plastic tubes, laminated tubes and metal tubes. PT-60A-C low speed tube filling and sealing machine is for all plastic tubes, laminated tubes.   Features
  1. The tube is automatically pressed into the tube holder. The elastic tension type tube holder is adopted to guarantee the consistent sealing height. The automatic color mark adjusting systems by stepping driving tube holder is adopted for oval tubes or other special-shaped tubes. Adopt mechanical transmission mode filling system ensuring the stability of loading capacity.
  2. The internal wall of tube adopts hot air sealing and the external wall of tube adopts cooling water circulative cooling, which can beautiful sealing effect. The fan is adopted to discharge the poisonous gas produced during the heating outside the room. After the sealing, the wind cooling system is adopted to prevent the heat from being conducted to the ointment.
  3. Automatic completion of filling, sealing and batch No. printing in one machine. Provided such functions as automatic supply of a tube to a worktable of machine, automatic tube blowing (clearing), tube color mark automatic adjustment in a holder and automatic filling and sealing.
  4. Speed shall be adjustable by inverter. The production capacity can be realized and control automatically. The code mechanical hand print the code automatically in the request position. Human-machine interface with direct display and control.
  Technical data
Model 80A-C 60A-C
Power Supply: 380V / 3 Phase / AC / 50 Hz
Produce speed 60-100(tubes/min) 30-60(tubes/min)
Main Power 2.2 kw 1.1kw
Adopt to the tube diameter Metal tube: 10-35mm Plastic tube and laminated tube: 10-60mm Plastic and laminated tube:  10-60mm
Filling volume Metal tube: 1-150ml Plastic tube and laminated tube: 1-250ml Plastic and laminated tube:   2-250ml
Filling precision ≤+/-1%
Heating power 4kw 3kw
Air pressure 0.4-0.6 MPa
Hopper volume 40L

Ultrasonic Bottle Washing Machine (QCK60)

Introduction This machine mainly used to wash penicillin vials, oral liquid bottles and ampoules. The ultrasonic cavitation, circulation water, WFI and compressed air device are set apart. It is one of the main equipment for new GMP technology requirements. Can be used for single or in production line. QCK series ultrasonic vial washing machine is a new generation of antibiotic glass vial cleaning equipment. Using the non-contact vial washing method which is now popular in the world, and using the "cavitation" effect of ultrasonic to produce a strong mechanical force to peel off the dirt on the vial, not only can the purpose of cleaning be achieved, but also various microorganisms, Enterobacteriaceae and similar bacteria attached inside and outside the bottle can be ultrasonically crushed, so as to play the role of cleaning, disinfection and sterilization. Feature
  • Circulating water, WFI and compressed air can apply to spraying needles which have has obtained national patent, to prevent cross contamination, circulating water can recycle and filter separately, save the energy and cost.
  • The cover can lift automatically, supply oil intensively, can relieve artificial work-load, decrease equipment fault rate, to make machine run steadily.
  • Auto sampling, tail bottle emptying function.
  • Equip with full digital differential pressure transmitter, monitor the water pressure, add ultrasonic intensity detector to make the whole washing process traceable, meet new GMP key parameter traceable demands.
  • Non-metal components are processed with imported polyformaldehyde.
Technical data
Suitable vial size: 10ml 13ml and 15ml
Production capacity >=180-200 vials/min for 10ml
Power supply： 380V 50Hz
Power consumption： 12KW
Water injection pressure and consumption: 0.15-0.35MPa 0.2-0.8m3/h
Clean air pressure and consumption 0.4-0.6MPa  20-50m3/h
 

Vial filling, Plugging and Capping Machine (ABGZ)

Brief introduction It is mainly used for filling and plugging of vial liquid and lyophilized products in pharmaceutical factories. Characteristic: This machine adopts single row synchronous belt for conveying, and servo motor control for following movement: filling needle up and down & fro and back, integral type sucker plugging and outfeed. It can automatically finish procedures of vial orienting, conveying,(pre-nitrogen), filling, (post-nitrogen), stopper orientation, plugging etc. For the plugging, it can do full plugging and half plugging. Based on all kinds of advanced technology in company, together with the filling principle, we designed and developed this kind of high speed sterile filling machine with all servo system. There are options for ORABS, IPC weighing system, CIP&SIP for filling system. The high configuration of this method can fully meet EU cGMP standard. Technical Data
Model Suitable sizes Output Filling heads Plugging heads Power Net weight Overall dimensions
ABGZ12 2-30ml vial 6000-24000pcs/h 12 24 17kw 2000kg 4670*2150*1850mm
ABGZ12/10 6000-20000pcs/h 10 16kw
ABGZ12/8 6000-16000pcs/h 8 15kw
ABGZ12/6 2-100ml vial 3000-12000pcs/h 6 12/24 14kw
ABGZ6 2-30ml vial 3000-12000pcs/h 6 14kw 1500kg 3950*1950*1850mm
ABGZ6/4 3000-7200pcs/h 4 13kw
ABGZ6/2 2-100ml vial 1000-3600pcs/h 2 12kw

显示 11-17 个结果（共 17 个结果）